Smart Technology For a safer stable environment
StableSafe offers cutting-edge sensor solutions for water monitoring, climate control, and security in barns, stables, and saddle rooms. Our AI-driven system delivers real-time alerts and valuable insights ensuring a safe and controlled environment for your animals and equipment. Easy to install and completely wireless.
StableSafe keeps you in control year-round, wherever you are.
Thank you for visiting us at GHS!
It was a pleasure meeting so many of you, hearing about your needs, and discussing how we can support you in creating a safer environment for your stables.
We truly appreciate the great conversations and valuable insights you shared with us.
If you have any further questions or would like to continue our discussion, don’t hesitate to reach out. We look forward to staying in touch and working together in the future!
Precise real-time measurement of temperature and humidity
Temperature & Humidity Sensor
Temperature & Humidity Monitoring with AI Insight Central – Optimize Climate in Barns & Stables
Accurate measurement of both temperature and humidity in real time. The sensors are connected to our AI Insight Central, allowing you to monitor and analyze data intelligently
Healthy Environment – Track key values to minimize risks of mold, moisture, and poor air quality.
Quick Response – Reacts immediately to sudden temperature changes, reducing risks for animals and equipment.
Alerts & Notifications – Receive warnings via SMS or voice messages if values become too high or low.
Designed for Nordic Conditions – Durable design that works year-round, even in cold and humid environments.
Ready to use
no wiring required for installation*
Real-Time Monitoring
We track temperature and humidity in real-time, collecting data every two minutes. The information is processed by AI Insight Central to detect anomalies and potential risks.
AI Insight Central
AI Insight Central collects and analyzes data from all your sensors, providing intelligent insights and detailed reports. The system identifies trends, warns of potential risks, and recommends preventive actions.
Real-Time Alerts
Instant alerts for critical events. Get immediate notifications of system changes and act quickly to prevent damage.
- Read temperature every 2 minutes
- Send an alarm if the temperature increases by more than 1 degree within 2 minutes.
- Send alarms if the battery need to be repleaced
- Send alarms if the device goes offline
* Requires StableSafe hub
Ensure Your Safety with Instant Alerts in Emergencies
Emergency Alarm
Panic Alarm for Increased Security
Receive immediate alerts in the event of accidents or emergencies.
Prevent serious situations and ensure safety with our panic alarm. In an emergency, the alarm is activated instantly, providing immediate alerts and a rapid response to protect people and animals in barns or stables.
Ready to use
no wiring required for installation*
Immediate Action
Activate the alarm so that all the contacts selected by the customer have the opportunity to provide a quick response and assistance.
Protect People & Animals
Ensure the safety of individuals, animals, and valuable equipment in barns or stables.
Easy Installation & Use
Install the alarm effortlessly and activate it with a single press when needed.
- Send alarms if pressed
- Send alarms if the battery need to be repleaced
- Send alarms if the device goes offline
* Requires StableSafe hub
Motion Sensor for Safe Equipment in the Saddle Room
Motion Sensor
In the saddle room, sensors detect movement and provide extra protection for your valuable tools and equipment by ensuring that unauthorized individuals do not go unnoticed.
Prevent damage and ensure the safety of your equipment with our motion sensor. In the saddle room, the sensor detects movement and triggers alarms or warnings in case of unauthorized activity, protecting your valuable tools and gear.
Ready to use
no wiring required for installation*
Enhanced Security & Monitoring
Detect movement, protect equipment, and log all activity. Gain a clear overview of movements and ensure nothing goes unnoticed.
Easy Installation & Flexibility
Install the sensor quickly and easily, and relocate it without reprogramming to protect different areas as needs change.
Automatic Alerts
Receive real-time alarms for suspicious activity, allowing you to act quickly.
- 2 minutes cooldown time
- Send alarms if motion detected outside of the allowed schema
- Send alarms if the battery need to be repleaced
- Send alarms if the device goes offline
* Requires StableSafe hub
Precision Water Monitoring for Every Drop
PipePulse
Frost Prevention with AI Insight Central
With our AI Insight Central, you gain smart insights, monitor water consumption, receive alerts for potential frost risks, and maintain full control over your water system all year round.
Prevent costly damage from frozen pipes with real-time frost detection. By monitoring water temperature and consumption, our AI Insight Central can predict when freezing conditions are about to occur. Get early warnings and take action before it’s too late, ensuring your system stays safe and functional all year round.
PipePulse clamp-on water meter and leak sensor. Non-invasive. No plumber needed.
Ready to use
no plumber required for installation*
Water Consumption
Monitor water usage in real-time to optimize consumption and avoid waste. Get detailed insights in liters and respond quickly to unusual patterns.
Frost Prevention
Prevent frost damage by monitoring water temperature in real-time. Receive early warnings and take action to protect your pipes and system before freezing occurs.
Real-Time Alerts
Instant alerts for critical events. Get immediate notifications of system changes and act fast to prevent damage.
* Requires StableSafe hub
When you order your StableSafe package, the sensors and hub will arrive pre-programmed and ready to use.
Easy to use
Place the sensors in your stable.
Connect the hub to the network. (The range is long, so it’s not a problem if it’s placed a few hundred meters from the stable/sensors.)
Log in to our customer portal using the credentials you received.
Add primary contacts who will be called and receive SMS alerts in case of an alarm.
Add secondary contacts (e.g., boarders) whom you can have the system call with a simple button press in case of an alarm. Done!
Frequently Asked Questions (FAQ)
No, we are an IT company specializing in monitoring your devices. When a sensor detects changes in temperature or humidity, we automatically call to inform you about the situation.
Our solution combines technology and security to protect what is important to you and ensure that you are always informed.
Our devices are delivered pre-configured. You just need to plug in the power and network cable to the gateway. No additional configuration is required!
However, if you'd like assistance with the installation, we offer it as a service for a fee.
After placing your order, you will receive a confirmation email. You will also be notified when the order is shipped.
When we ship the items, we will also send the invoice to your email address, which includes the startup cost.
The monthly fee starts from the day your gateway or sensors go online, and the invoice is sent at the beginning of the next month with a 10-day payment term.
It depends on the sensor. Typically, we program our sensors to last at least 2 years.
Yes, our fixtures are designed to withstand the tough conditions in stable environments, including moisture, ammonia, and dust.
Yes, in our portal portal.stablesafe.se you can configure the devices and change primary and secondary contacts yourself.
The notice period is one month, in accordance with the standard terms in Sweden and Europe.
No, our systems are designed to work without wifi in the stable and have a long range to cover the entire area.
Yes, you can easily add more sensors if needed. The new sensors come pre-assembled and ready to be installed.
The choice of gateway depends on the size of the stable and how many sensors you need to cover. For example, if your stable is modern and made of metal, we recommend the larger model for better coverage. If the stable is smaller or made of different materials, the smaller model should be sufficient. If you choose the wrong model, we can easily exchange it for the correct one and only charge you for the price difference. We are happy to help you choose the right gateway based on your specific needs.
The number of sensors depends on the size of the stable and the specific areas you want to monitor. For temperature and humidity, we recommend one sensor per 30 m². We can also help you map out your stable and provide recommendations based on your needs to ensure you get the right number of sensors.
A hub in StableSafe is a central unit (included in all our packages) that collects data from various sensors and devices in the stable or barn. It forwards the information to the StableSafe system, where it can be analyzed and used to monitor temperature, humidity, motion, and other important factors. The hub ensures a stable and secure connection for all connected devices within the network.
You can see the startup cost in our online shop at portal.stablesafe.se before you complete the purchase.
Stay Informed!
Sign up to receive the latest updates, news, and special offers directly in your inbox.
Be the first to know about new features, important announcements, and events!